Special bearings
Non-Standard & Made to Drawing
When the catalogue stops, the workshop starts. Special bore, width, clearance, cage material or coating — manufactured to your print, from a single piece to a series run.
- Series
- Per drawing
- Bore
- 5 – 1500 mm
- Class
- On drawing
Design
When the catalogue stops.
Every batch is measured on the finished part, and the measurement file travels with the goods. Send a designation, a drawing or a photo of the failed part and an engineer will answer with a lead time and a price, usually inside 48 hours.
- Print, model or sampleA 2D drawing, a 3D model or a failed part in a box are all accepted as the starting point.
- Material to specificationBearing steel, stainless, ceramic or a coating, chosen against the environment.
- First article before the batchThe first part is measured and reported before the rest of the run is released.
- Traceable lotsHeat number, heat-treatment batch and measurement file recorded per lot.
Technical data
Per drawing| Input accepted | 2D print · 3D model · physical sample |
|---|---|
| Bore range | 5 – 1500 mm |
| Outer diameter | Up to 1800 mm |
| Accuracy | As specified on the drawing |
| Material | Bearing steel, stainless, ceramic, special coatings |
| Cage | Brass, steel, polymer, or none (full complement) |
| Minimum quantity | One piece for a prototype, series pricing from the second release |
| Lead time | 4 – 8 weeks typical, confirmed after drawing review |
Where it is used
Common applicationsLegacy equipment
A part that the original maker no longer lists, remade to the sample.
Prototype builds
One-off bearing for a test rig, before the design is frozen.
Harsh environment
Stainless or coated variants for washdown, vacuum or high temperature.
Integrated designs
A bearing race machined directly into the customer's shaft or housing.
Send the part number.
We will send the answer.
A designation, a drawing, or a photo of the failed part is enough to start. Technical questions reach an engineer, not a mailbox.
Related families
All 11 familiesThrust Ball Bearings
Two flat washers and a set of balls take the load in one direction. The simplest way to locate a vertical shaft and carry it…
View family BallDeep Groove Ball Bearings
The default choice for a rotating shaft. An uninterrupted deep raceway carries radial load, both axial directions and the small…
View family RollerFour-Row Tapered Roller Bearings
Rolling-mill duty. Four tapered rows inside one chock carry extreme radial load and locate the roll axially at the same time, so…
View family